cMT3092X

[Introduction]

cMT 3000X HMI is a combo that integrates high-performance HMI with CODESYS PLC controller system on an innovativeWeintek 9.7" HMI architecture where a duo-core CPU runs two
independent operating systems. With the multi-core processor, cMT HMI + CODESYS is able to not only provide data visualization with an operable user interface but also run controller logic, and the two systems run independently without mutual interference.

[Features]

  • 9.7″ 1024 x 768 TFT LCD
  • Quad-core Cortex-A17 CPU with High Performance
    Dedicated 3D Processor
  • Built-in 4GB Flash Memory and RTC
  • Built-in Power Isolator
  • CAN Bus Supports CANopen Protocol
  • Built-in EasyAccess 2.0 License

[Environmental Specification]

  • Operating temperature: 32° ~ 122°F
  • Storage temperature: -4° ~ 140°F
  • Relative humidity: 10% ~ 90% (non-condensing)
  • UL: cULus Listed
Display    Display   9.7" TFT              
 Resolution    1024 x 768  
Aspect Ratio 4:3
 Brightness(cd/m2 350
 Contrast Ratio   500:1  
 Backlight Type    LED  
 Backlight Life Time   >30,000 hrs  
 Touch Panel   Type   4-wire resistive type
 Memory    Flash    4 GB
 RAM   1 GB
   Processor    Quad-core 32-bit RISC 1.6GHz  
 I/O Port    SD Card Slot   N/A
USB Host  USB 2.0 x 1 
USB Client   N/A
 Ethernet   LAN1: 10/100/1000 Base-T x 1
LAN2: 10/100 Base-T x 1
 COM Port   Con.A: COM2: RS-485 2W/4W COM3:RS-485 2W, CAN Bus
Con.B: COM1 RS-232 4W, COM3 RS-232 2W
 Audio Output  Built-in Mono Speaker
 CAN BUS   Yes
   RTC   Yes  
 Power    Input Power   24±20% VDC
 Power Consumption   EasyBuilder Pro
 Installation Instruction
 Download PDF